Yes, You Can! How To Build An Ice Rink In Your Backyard.
Think you can't possibly learn how to build a backyard ice rink on your property? Guess again! At Iron Sleek, we offer backyard ice rink kits that suit virtually every yard layout to make the entire building process as seamless and straight forward as possible. We have the experience, expertise, and products to help get this done for you.
The Buyers Guide On How To Build An Outdoor Rink In Your Backyard
Ready to get started with how to build a backyard hockey rink that your family will love spending time on? Follow these simple steps for optimal success:
Pick Your SpotThe first tip in how to build a backyard rink: Find the perfect outdoor spot for it. Rule of thumb? The flatter and the more shaded, the better. Avoid highly sloped areas for better results. Find the most level area in your yard with relatively dry and solid soil (in close proximity to a water source) and you have found a location for your rink. For more details on choosing a spot to build a rink, click here.
Measure Your Working AreaOnce you've identified where your skating arena can go, you can pinpoint the size of the kit you can accommodate. When considering how to build an outdoor rink, keep it mind that it must fit on the selected workable area. When you purchase a kit from Iron Sleek, you will receive a liner that is at least 4-5 feet longer and 4-5 feet wider than the actual rink frame. Choose a size wisely. More rink means more maintenance. As your kids get bigger your rink should get bigger.
Survey AreaPinpoint and document the grade/pitch of the arena outline using a transit laser or a string line level. Knowing the grade will determine the amount of support required to hold back the water pressure. Iron Sleek Brackets are spaced closer together for higher pitched sights. The grade will also guide the setting on your board heights. We also have a video on using a laser transit for those with access to one.
Layout And BuildYou are officially ready to build your frame using Iron Sleek Rink System. Some things to remember during the process include:
- Choose lumber, plywood, or Iron Sleek Poly Steel boards for containment walls
- Follow the bracket spacing chart. Remember, 4 feet apart or tighter when using 3/4" plywood.
- Use Iron Sleek Corner Brackets to secure rink corners, use at least 2 steel brackets per corner. For more on corners click here.
- Iron Sleek Extension Bracket allows for higher board heights due to excessive land grade (can be easily purchased aftermarket as needed after rink is built). If you have a lot of land grade, you may need Iron Sleek Outriggers as well.
Inspect Rink BoardsOnce you've built out the frame, closely evaluate the inside of the rink boards for projections and/all sharp pieces that may puncture the liner. Additionally, determine that the frame proves solid and sturdy. You will also want to inspect the inside of your rink for anything that may tear the liner.
Fill In The GapsInspect the bottom of your frame boards for large air gaps. The water filled liner will fill the air gaps looking like a water blister from the outside of the rink. This can create risk of puncture to the liner from the outside. If your fingers can fit between the bottom of the rink frame and the grass, you should fill the gap with Iron Sleek Rink Cove foam. If cove is not in the budget, minimally backfill with packed dirt (never snow) to eliminate the space.
Line AwayThe next step in how to build an ice rink in your backyard: Laying out the liner. Stretch the liner inside the frame, leaving plenty of slack to tuck into corners and around bottom of boards. Let excess liner drape over the rink frame and Iron Sleek Hardware to keep brackets dry and boards from absorbing too much heat. Watch this YouTube to see how to stretch a liner.
Fill It UpYou are ready to start filling your rink with water. Some things to consider:
- Cover your fill hose with a rag, sock or something non-abrasive before you place it in the rink.
- When filled, the lowest part of your rink should have at least 3 or 4" of water
- Never let water spill over frame
- If concerned about spilling over, turn off water and add 2nd story of lumber using Iron Sleek Extension Bracket.
Secure The Rink LinerA loose liner can let water out. Now that your arena is filled, stapled the excess liner to the outside of the frame to keep it secured.
Skate, Skate, Skate!Inspect your rink after 3-4 days of temperatures under 20 F to ensure you have the solid 3" of ice needed to skate (skating too soon can risk tearing the liner with a blade). No need to be overly scientific here, just walk the rink in your shoes first (not skates). Once the ice could support an adult without out water gushing up the side you should be good to skate, skate, skate!
Check out our PDF version of Building a 20' X 46' Rink.
Want to hear more? Contact Iron Sleek today and talk with a team member now!
Even if your are building your rink with lumber or plywood, you can still learn a lot from watching a poly-steel rink being put together! Watch the video below.